Laterite Nickel Rotary Kiln Production Line

QMC-F/Y/X Series Plused Jet Cloth filter

QMC-F/QMC-Y/QMC-X Series Plused Jet Cloth  filter

The introduction of  the pulse bag :

The XMC pulse bag filter is a new, improved and efficient pulse dust collector in GB MC-II and Japan TBF baghouse basis, combines the advantages of the sub-room cleaning a variety of pulse jet dust collector, to overcome the sub-chamber cleaning strong enough, the air inlet and the uneven distribution of other shortcomings, expanded the scope of the application. the XMC type dust collector structure which is characterized by, so to improve the collection efficiency, adaptability, and to extend the service life of the bag, after years of production practices, equipment operation stable, small amount of maintenance, the combination of range, well received by consumers. This series of products can be widely used in the asphalt mixing plant floor, crushing, grinding machine, dryer, kiln dust and the dust of the dust collection system, dust filter material commonly used polyester needle felt, which allows continuous use temperatures ≤ 120 ° C, such as the bag with the US-Tasman high temperature needle felt, which allows up to 204 ° C working temperature. precipitator according to different specifications of the solenoid valve can be combined a variety of different specifications of the precipitator, precipitator of this series of negative pressure or positive pressure operation, the body structure without any change in collection efficiency of 99.8%, purification of the gas dust concentration of <100mg/m3 Series dust collector such as need additional insulation heating device used in cold regions or flue gas is lower than zero  the shell is also a corresponding change.

The working principle of XMC pulse bag:

Dusty gas from the air inlet into the dust collector, the first encounter the middle of the air inlet and outlet of the inclined plate and the baffle, the airflow will turn into the ash bucket, while the gas flow slowed down, due to inertia, so that the coarse particles of dust in the gas flow directly into the graybucket. in advance the dust role subsequently folded into the hopper flow upward through internal bag equipped with a dust skeleton dust arrested for bag-set in the outer surface of the purified gas into the upper part of the bag room clean room, bringing togetherto discharge outlet, the dusty gas in the process of purification through the bag, along with the increase of time plot attached to the bag on the dust is more and more, to increase the bag resistance, resulting in air volume is gradually reduced, in order to work properly.To control the resistance within a certain range (140-170 mm water column), on the bag cleaning, cleaning triggered by the order of the general control device of the control valve to open the pulse valve, the air bag within the compressed air injection tube Kong Jingwenventuri jet to the bag, bag instant rapid expansion, so that the plot attached to the bag surface dust off the bag regeneration. clear the dust falling into the ash bucket, ash system discharge body. thusmake the plot attached to the bag on the dust cycle pulse cleaning, so that the purge gas through normal, to ensure that the dust removal system is running.

parameters\spec MC24 MC36 MC48 MC60 MC72 MC84 MC96 MC120
Filtering area(m2) 18 27 36 45 54 63 72 90
Filtering bag number(piece) 24 36 48 60 72 84 96 120
Filtering air speed(L/m2.s) 20-40 20-40 20-40 20-40 20-40 20-40 20-40 20-40
Filtering air volume(m3/h) 1300-2600 1950-3900 2600-5200 3240-6480 3900-7800 4550-9100 5200-10500 6500-13000
Max. Overall dimension L 1000 1400 1800 2200 2600 3000 3560 4360
W×H 1450×3700 1450×3850 1450×4100
Dust remover Pulse valve number 4 6 8 10 12 14 16 20
Compressed air consumption m3 0.07
Compressure air pressure
previous: Precipitator