Current position : HOME>>>>Cement Production Line

Cement Production Line

Jaw Crusher

Introduction of Jaw Crusher:
  Jaw Crusher is mainly used to crush kinds of mining stones primarily, and the largest compression resistance of the material is 320MPa. The jaw crusher is widely used in stone mining, metallurgy industry, building material, highway, railway, and chemical industry.
  Working Principle of Jaw Crusher:
  The motor transmits power through belt, drives the moving jaw to do periodic motion towards the fixed jaw by the eccentric shaft. The angle between toggle plate and moving jaw plate increases when moving jaw moves . So the moving jaw moves towards the fixed jaw. The stuff will be crushed in this process. The angle between toggle plate and moving jaw decreases when moving jaw moves down, the moving jaw moves leaves fixed jaw by pulling rod and spring, the final crushed stuff will be discharged from the outlet.
  Characteristics of Jaw Crusher:
  -High ratio of crushing,
  -Even final size,
  -Simple structure,
  -Reliable working condition,
  -Easy maintenance,
  -Low operating cost.
  Main techinacal parameters of Jaw Crusher:

Model Feed inlet Size(mm) Max inlet Size(mm) Capacity(t/h) Electric Power(Kw) Overall Size L*W*H(mm) Weight(t)
PE150*250 150*250 125 1-5 5.5 875*758*850 0.81
PE250*400 400*250 210 5-20 15 1450*1315*1296 2.8
PE400*600 600*400 340 16-65 30 1565*1732*1586 6.5
PE500*750 750*500 425 45-100 55 1890*1916*1870 10.1
PE600*900 900*600 500 50-120 55-75 2305*1840*2298 15.5
PE750*1060 1060*750 630 52-180 110 2450*2472*2840 28
PE900*1200 900*1200 750 140-260 135 3200*3050*2950 54.5
PE1000*1200 1000*1200 850 315-342 135 3335*3182*3025 57
PE1200*1500 1200*1500 1020 400-800 160 4200*3750*3820 100.9
PEX250*1000 1000*250 210 16-52 30-37 1530*1992*1380 6.5
PEX250*1200 1200*250 210 20-60 37 1900*2192*1430 7.7